True North Turbos TNT372 T4

True North Turbos TNT372 T4

76x68 Turbine / T4 .88 A/R Open / No / No
$1,282.49
Skip to product information
True North Turbos TNT372 T4

True North Turbos TNT372 T4

$1,282.49
Turbo Configuration
Drain Flange
Compressor V-Band Kit

TNT372

Applications

  • Direct bolt-on replacement for S371 and S372 turbos and other 72mm 300-frame units
  • T4 inlet flange

Features

  • 72mm (2.83") billet compressor wheel (forged 2618 aluminum)
  • Choice of 76x68mm, 80x73mm, or 82x75mm turbine wheel
  • Journal bearing with 360-degree thrust bearing
  • Rated to 1,140 crank horsepower
  • 4" compressor inlet, 2.5" compressor outlet
  • T4 flange housing options: 0.88 A/R open or 0.91 A/R divided
  • Boss cast and pre-tapped for a rotor speed sensor
  • 1/8" NPT pressure port (may need to be drilled through)
  • Interchangeable turbine housings
  • Every TNT turbo is designed, machined, assembled, and balanced in Canada.

Notes

  • Uses the same mounting hardware as existing S300-frame turbos
  • Turbine inlet: T4 bolt pattern
  • Turbine discharge: 4.25" (108mm) Marmon flange
  • Compressor discharge: V-band, sized to your charge pipe (2.5", 3.0", or 3.5" stainless kits offered below)
  • Oil drain: 50mm (1.97") mid-frame bolt centres — 10AN is typical for street use; 12AN is the better choice for hard-worked / high-boost builds
  • Journal-bearing oil feed should be run with an appropriate restrictor. Black Sheep does not currently list a complete oil-feed kit for this frame
  • Power ratings are crank horsepower
  • Built to order in Canada

The TNT372 is the 72mm T4 in the 300-frame lineup, with three turbine-wheel choices and open or divided T4 housings.

You may also like