Skip to product information
True North Turbos TNT372 T4
$1,282.49
TNT372
Applications
- Direct bolt-on replacement for S371 and S372 turbos and other 72mm 300-frame units
- T4 inlet flange
Features
- 72mm (2.83") billet compressor wheel (forged 2618 aluminum)
- Choice of 76x68mm, 80x73mm, or 82x75mm turbine wheel
- Journal bearing with 360-degree thrust bearing
- Rated to 1,140 crank horsepower
- 4" compressor inlet, 2.5" compressor outlet
- T4 flange housing options: 0.88 A/R open or 0.91 A/R divided
- Boss cast and pre-tapped for a rotor speed sensor
- 1/8" NPT pressure port (may need to be drilled through)
- Interchangeable turbine housings
- Every TNT turbo is designed, machined, assembled, and balanced in Canada.
Notes
- Uses the same mounting hardware as existing S300-frame turbos
- Turbine inlet: T4 bolt pattern
- Turbine discharge: 4.25" (108mm) Marmon flange
- Compressor discharge: V-band, sized to your charge pipe (2.5", 3.0", or 3.5" stainless kits offered below)
- Oil drain: 50mm (1.97") mid-frame bolt centres — 10AN is typical for street use; 12AN is the better choice for hard-worked / high-boost builds
- Journal-bearing oil feed should be run with an appropriate restrictor. Black Sheep does not currently list a complete oil-feed kit for this frame
- Power ratings are crank horsepower
- Built to order in Canada
The TNT372 is the 72mm T4 in the 300-frame lineup, with three turbine-wheel choices and open or divided T4 housings.